Some more ramblings from the world of 3D printing

Here are some views of other stuff I've done. Some good, some bad, some were just good ideas at the time - a bit like buying metal and plastic miniatures and rulesets. 

A combined picture of some 6mm American civil war and a 1750's British infantryman for AWI or French and Indian Wars.  At the right of the picture are some ACW infantry I boosted to 10/12mm in the software.  

Here is the British infantryman beside a Perry miniature from their plastic AWI range. Quite good size-wise. 

And painted up. Not bad at all. I could be critical about the footwear and some minor bits, but the chap is OK. I got a full set of these chaps; marching, advancing, firing etc. along with usual command figures. 

Some paint splashed on to the ACW figures. They came out OK.  

A bit of wonderful silliness. This is the kind of figure I've seen in passing and thought - why not. I also got skeletons for a possible Dragon Rampant type game. 

Some tanks. These are 1:200 scale but can be up or down scaled I did these as a test to see if I could revisit a Kursk project at a scale smaller than 15mm, perhaps 10mm. They came out OK when painted. 

I think I'm discovering that the same attraction in normal miniatures, is just the same in 3D; the desire to get some new figures and pick up whatever catches the eye. But that's now changing, a bit. 

That's it for now.  

Earlier this year I thought about 3d printing and got myself a resin printer.  A friend has had a plastic printer for a while and I saw and painted a sample for him.

I investigated 3D printing and eventually bought an Elegoo Mars. Here it is in action. 

I blundered about a lot, and I'm still learning.  I'll offer some cautionary notes later, but for now, here are some early test prints. These figures were free and are 10mm fantasy 'Warmaster' types. 

Here are some figures given a basic undercoat and wash. Just to see what they look like. 

And with a touch more paint. The chaps on the left are 15mm prints boosted/upscaled on the computer file from the 10mm originals. The chaps on the right are the originals. 

Some American Civil War 10mm upscales, 6mm originals, and at the back is a British 28mm seven years war chap.

Here is the British 28mm seven years war chap alongside a Perry Miniatures 28m AWI figure. 

I've done a lot more prints since and I'll post examples later. But for now, here are my initial lessons.

Cost and initial outlay on materials. 

The printer cost about £170. 

In addition, resin is needed at around £16 plus for 500g or £25 for a 1 kg bottle. A model may only weigh about 2-4 or more grams, so you get a lot of models from one bottle, but I wasted a lot of resin on failed prints and learning. Many models will need supports to build, though that is a topic for another day. 

Isopropyl 99% alcohol for cleaning the resin models after printing. I started buying a litre, but later bought 5 litres for less than £20 if I recall. I had used isopropyl before as it's great for using as a paint thinner and brush cleaner.

Suitable containers for cleaning models. I got additional containers to use for soapy water to wash the models after being washed in the alcohol. 

Kitchen roll for general cleaning and mopping up resin spills. The thing with photo-cure resin is that it only cures fully in exposure to UV light, so I spend time cleaning the vat that contains the resin and the build plate and general cleaning. It can get messy. 

And just as important, face mask and latex gloves. The resin smells a bit and the liquid resin may cause skin irritation, so care is needed. 

And finally the cost of the models, or rather the cost of the computer files. For example, the seven years war pack cost me $15 for all ranks, marching, advancing, firing plus officer, standard and drummer.  

And, and ... almost forgot. Do have a decent computer with a good graphics card and capability. I initially put the free Chitubox software that came with the printer, on to an older computer and I couldn't see some files because the graphics card was older. I switched to a more powerful laptop and everything has been fine since. 

I'll write more on my experiences later.  

More on French and Indian Wars highlanders.

Further to last post on the French and Indian Wars highlanders, here is the stage by stage painting.

I thought I'd have a crack with Contrast Paints, just to see what was possible. 

The red was OK but I didn't like the blues I had, so I went back to usual acrylics. The blue here is Vallejo's Intense Blue.  

Incidentally, I decided to do the cuff facings blue, even though I know the Black Watch were not appointed a Royal regiment till after their valiant performance at Ticonderoga. Before that the facings were buff.  

Also, of minor historical interest, is the regimental number was initially the 43rd foot and this lasted for the first 10 years of its regimental existence. Then, when a lower numbered regiment mutinied and was disbanded, the higher numbered regiments all moved up one, and the Black Watch became it's much more famous number, the 42nd, the 'forty-twa'. 

I'm not sure if it's obvious from the last photo, but the kilts are missing the multiple pleats / folds at the back. So I tried just painting them on. 

Here, the kilts are starting to look better and I've decided to paint the uniform jackets red. I tried contrast paint on the leggings, but decided to add a layer or two on top.  

And this is basically the figures nearly done. Just some tidying up and the metallic to do at this stage. 

And so, repeat pictures of the finished articles. 

More later ... 

first posts in a long time

It's way past time I was posting. So I'll post a few pictures of activities, generally going backwards.

Here's my latest activity.  I played a couple of games of the new glossy version of Muskets and Tomahawks with friends. They were good games and a friend bought the British for the French-Indian War.  Some of the figures looked nice so I offered to paint the highlanders and the friend gave me the figures to take away.

To cut a long story short, here are the finished figures. I'll leave the finishing of the bases to my friend. 

Now, one of the things to emerge from this exercise, is a little personal moan - why is it that some sculptors just do not understand the kilt or the way that it hangs or moves. It seems to me that some sculptors assume a kilt is like a skirt and graft on the bottom of a Roman or Greek tunic, or indeed a skirt, onto a British uniform top and think job done.

But no, the back of the kilt has a smooth front but pleats at the back, a deliberate series of folds that allow for easier movement. It's been there since the 18th century. 

Sadly, these FIW highlanders had a smooth tunic type thing all the way round, so I tried to paint on the deep folds at the rear. I think I was reasonable successful. If they had been my figures I would have tried to sculpt or carve folds, but as it was I tried my best with paint. 

Bah humbug, och aye, ye ken...  

My other major activity of recent times has been 3D printing, so I'll post more on that later.

Classical Indians finished and French Light Infantry nearly done

 So here is where I was at the end of the week.  The Indians are done and have already had a game of DBA on the table.  These are all Essex Miniatures 15mm.  

And the Napoleonic French Light Infantry. Nearly finished, but now looking like the finished article. I've still to finish the basing, sort the pompom colours which I mixed up, and finally add the flag. 

Just peeking in at the bottom of the last photo are figures for a unit of French Line infantry. These are next for the brush. 

Classical Indians and Napoleonic French nearly done

Just keeping on, keeping on. The Indians and some Napoleonic French Light Infantry that have been on a tray for a while are nearly complete. 

Napoleonic French light infantry first. These are CGM figures with just the basing to do.  Except, as I look at the photo, I realise I've missed a shako pompom. Ah, well, these things happen. 

Still, not to bad.  As usual, in recent years, I've gone for slightly brighter/lighter tones, just to make he figures look nice from a distance. 

And the Classical Indians. Just the elephants to paint and assemble the chariot crews and the boss man in the howdah. Then I'll move on to finish off the basing at the same time I do the Napoleonic figures above. 

And that's it for now.  

Back to painting

I've not painted anything for a long time, but after a friend mentioned DBA, I decided to have a look in my unpainted DBA box.  

First the box, and in here are Indians, Persians, Greeks and Gauls/Galatians. I decided to start the Indians. 

Here the first flesh paint has been applied. In the centre are two stands of Hordes where I tried the GW Contrast paints. I was pleasantly surprised by the result and I will use them again, selectively.  The other figures were painted with my usual thin semi-wash of flesh with an umber wash on top.  

And this is the stage I've reached. I've tidied up the sarong with a pale flesh colour that looks like unbleached cloth and then added some white. In the bottom picture, I've applied the colours to the horses; again a thin semi-wash so that the paint flows easily in to folds and muscles. Next for the horses will be to add a black or dark wash to the fetlocks, mane and tail.

And that's it for now.  Though one other thing I've found is that my back was starting to ache after a while. I am a bit older, but I think I will have to look at my painting setup and my posture, and try to make sure that painting remains a relaxing and enjoyable part of the hobby for me.