Some pictures from Carronade 2021 in Falkirk.

With a bit of a cautious cheer, we welcomed the return of the Carronade show at Falkirk. This was the first games show in 2 years. 

All the usual Covid restrictions were in place, but it was good to see some very nice games and some familiar eyes above the necessary and compulsory face-masks. 

Apologies, I meant to post pictures a week ago, just after the event, but here are some games that caught my eye. 

A very nice AWI game in 28mm. Black Powder rules. A very nice cloth mat and lots of terrain.  

A game of Bolt Action. This one using the fur mat idea. 

Another game of Bolt Action. There were quite a few games of BA at the show. This one was a Dad's Army type of scenario. Again, lots of terrain made for a good skirmish game. 

Another Bolt Action game.  This one was a bit of a "ye wot". A Pacific island attack on a cloth mat that was 26 foot long and 6 foot wide. Very impressive. 

An ancients bronze age game. I can't remember the rules, but the figures were nice. 

A nice 15mm Seven Years War game using Black Powder. Again, like BA, it was interesting to see the amount of games that used the BP rules. 

I thought this was a nice game, though slightly spoiled by the stats cards being placed full on the table. I think it would have been better to have left the stats cards at the table edge to let the eye focus on the figures, terrain and scenario. 

A Thirty Years War game in 15mm. Lutzen. And at this point, Gustavus is still alive.

A nice British in India game in 28mm. It's not clear in the photo, but the cotton wool markers on the guns had little red flashing lights inside to suggest the artillery firing. 

And that was it. There will probably be more and better pictures on the Falkirk Carronade website.  

While there, I met some old friends and familiar faces that I hadn't seen for a long time. It was good to chat and know they were OK.  

Also had a very good chat with a fellow club member about ongoing projects and a desire to cut down. I came away from the conversation (and the show) refreshed in gaming thoughts and focus. When I got home I cleared away some stuff from my workbench and decided to focus on two projects and to try to get them fully painted and finished. Both have been in a state of semi-completed for well over a year. More on them later (though the 3D adventures continue...). 

Some more ramblings from the world of 3D printing

Here are some views of other stuff I've done. Some good, some bad, some were just good ideas at the time - a bit like buying metal and plastic miniatures and rulesets. 

A combined picture of some 6mm American civil war and a 1750's British infantryman for AWI or French and Indian Wars.  At the right of the picture are some ACW infantry I boosted to 10/12mm in the software.  

Here is the British infantryman beside a Perry miniature from their plastic AWI range. Quite good size-wise. 

And painted up. Not bad at all. I could be critical about the footwear and some minor bits, but the chap is OK. I got a full set of these chaps; marching, advancing, firing etc. along with usual command figures. 

Some paint splashed on to the ACW figures. They came out OK.  

A bit of wonderful silliness. This is the kind of figure I've seen in passing and thought - why not. I also got skeletons for a possible Dragon Rampant type game. 

Some tanks. These are 1:200 scale but can be up or down scaled I did these as a test to see if I could revisit a Kursk project at a scale smaller than 15mm, perhaps 10mm. They came out OK when painted. 

I think I'm discovering that the same attraction in normal miniatures, is just the same in 3D; the desire to get some new figures and pick up whatever catches the eye. But that's now changing, a bit. 

That's it for now.  

Earlier this year I thought about 3d printing and got myself a resin printer.  A friend has had a plastic printer for a while and I saw and painted a sample for him.

I investigated 3D printing and eventually bought an Elegoo Mars. Here it is in action. 

I blundered about a lot, and I'm still learning.  I'll offer some cautionary notes later, but for now, here are some early test prints. These figures were free and are 10mm fantasy 'Warmaster' types. 

Here are some figures given a basic undercoat and wash. Just to see what they look like. 

And with a touch more paint. The chaps on the left are 15mm prints boosted/upscaled on the computer file from the 10mm originals. The chaps on the right are the originals. 

Some American Civil War 10mm upscales, 6mm originals, and at the back is a British 28mm seven years war chap.

Here is the British 28mm seven years war chap alongside a Perry Miniatures 28m AWI figure. 

I've done a lot more prints since and I'll post examples later. But for now, here are my initial lessons.

Cost and initial outlay on materials. 

The printer cost about £170. 

In addition, resin is needed at around £16 plus for 500g or £25 for a 1 kg bottle. A model may only weigh about 2-4 or more grams, so you get a lot of models from one bottle, but I wasted a lot of resin on failed prints and learning. Many models will need supports to build, though that is a topic for another day. 

Isopropyl 99% alcohol for cleaning the resin models after printing. I started buying a litre, but later bought 5 litres for less than £20 if I recall. I had used isopropyl before as it's great for using as a paint thinner and brush cleaner.

Suitable containers for cleaning models. I got additional containers to use for soapy water to wash the models after being washed in the alcohol. 

Kitchen roll for general cleaning and mopping up resin spills. The thing with photo-cure resin is that it only cures fully in exposure to UV light, so I spend time cleaning the vat that contains the resin and the build plate and general cleaning. It can get messy. 

And just as important, face mask and latex gloves. The resin smells a bit and the liquid resin may cause skin irritation, so care is needed. 

And finally the cost of the models, or rather the cost of the computer files. For example, the seven years war pack cost me $15 for all ranks, marching, advancing, firing plus officer, standard and drummer.  

And, and ... almost forgot. Do have a decent computer with a good graphics card and capability. I initially put the free Chitubox software that came with the printer, on to an older computer and I couldn't see some files because the graphics card was older. I switched to a more powerful laptop and everything has been fine since. 

I'll write more on my experiences later.  

More on French and Indian Wars highlanders.

Further to last post on the French and Indian Wars highlanders, here is the stage by stage painting.

I thought I'd have a crack with Contrast Paints, just to see what was possible. 

The red was OK but I didn't like the blues I had, so I went back to usual acrylics. The blue here is Vallejo's Intense Blue.  

Incidentally, I decided to do the cuff facings blue, even though I know the Black Watch were not appointed a Royal regiment till after their valiant performance at Ticonderoga. Before that the facings were buff.  

Also, of minor historical interest, is the regimental number was initially the 43rd foot and this lasted for the first 10 years of its regimental existence. Then, when a lower numbered regiment mutinied and was disbanded, the higher numbered regiments all moved up one, and the Black Watch became it's much more famous number, the 42nd, the 'forty-twa'. 

I'm not sure if it's obvious from the last photo, but the kilts are missing the multiple pleats / folds at the back. So I tried just painting them on. 

Here, the kilts are starting to look better and I've decided to paint the uniform jackets red. I tried contrast paint on the leggings, but decided to add a layer or two on top.  

And this is basically the figures nearly done. Just some tidying up and the metallic to do at this stage. 

And so, repeat pictures of the finished articles. 

More later ... 

first posts in a long time

It's way past time I was posting. So I'll post a few pictures of activities, generally going backwards.

Here's my latest activity.  I played a couple of games of the new glossy version of Muskets and Tomahawks with friends. They were good games and a friend bought the British for the French-Indian War.  Some of the figures looked nice so I offered to paint the highlanders and the friend gave me the figures to take away.

To cut a long story short, here are the finished figures. I'll leave the finishing of the bases to my friend. 

Now, one of the things to emerge from this exercise, is a little personal moan - why is it that some sculptors just do not understand the kilt or the way that it hangs or moves. It seems to me that some sculptors assume a kilt is like a skirt and graft on the bottom of a Roman or Greek tunic, or indeed a skirt, onto a British uniform top and think job done.

But no, the back of the kilt has a smooth front but pleats at the back, a deliberate series of folds that allow for easier movement. It's been there since the 18th century. 

Sadly, these FIW highlanders had a smooth tunic type thing all the way round, so I tried to paint on the deep folds at the rear. I think I was reasonable successful. If they had been my figures I would have tried to sculpt or carve folds, but as it was I tried my best with paint. 

Bah humbug, och aye, ye ken...  

My other major activity of recent times has been 3D printing, so I'll post more on that later.